Overview

Ulticom provides purpose-built boards to interconnect Signalware applications with SS7 and ATM networks using T1/E1/J1 interfaces. Form factors supported include PCI, PCI-Express, PMC, and AMC. All 300 series Signalware SS7 Boards utilize a consistent HW/SW architecture and have field-upgradeable link densities, enabling low cost deployments, which can be scaled over time to meet traffic demands. Together with the Signalware SS7 host software, the boards form a complete, integrated solution upon which applications can be developed and deployed.

Signalware SS7 Boards

In compliance with the European Union directive regarding the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS), Ulticom offers the following RoHS-compliant Signalware SS7 Boards:

AH0305 - AMC SS7 T1/E1/J1 Interface Board

• Available in compact, mid-height, and full-height form factors
• AMC.0 and AMC.1 compliant
• Four T1/E1/J1 interfaces field-expandable up to 124 Low-Speed Links at 48, 56, or 64 Kb/s or 4 High-Speed Links (HSLs) based on Q.703 Annex A or ATM
• Preventative Cyclic Retransmission (PCR) for satellite networks under ANSI, ITU, and Chinese standards

XH0303 - PCI Express SS7 T1/E1/J1 Interface Board

• Full (Standard) Height and Low-profile (Full Height compatible) PCI-Express form factors
• PCI-Express X1 lane
• Two or Four T1/E1/J1 interfaces which are field-expandable up to 124 Low-Speed Links at 48, 56, or 64 Kb/s or up to 4 High-Speed Links (HSLs) based on Q.703 Annex A or ATM (dependant upon number of interfaces)
• Preventative Cyclic Retransmission (PCR) for satellite networks under ANSI, ITU, and Chinese standards

MH0302 - PCI Mezzanine Card (PMC) SS7 T1/E1/J1 Interface Board

• Single wide PMC form factor
• Supports standard PCI version 2.3 compatible local bus interface
• Four T1/E1/J1 interfaces field expandable up to 124 Low-Speed Links at 48, 56, or 64 Kb/s or four High-Speed Links (HSLs) based on Q.703 Annex A or ATM
• Universal 5V ad 3.3V signaling levels, full bus master/slave, and auto-configure to 33Mhz/32-bit or 66Mhz/64-bit
• Preventative Cyclic Retransmission (PCR) for satellite networks under ANSI, ITU, and Chinese standards

PH0301 - PCI Bus SS7 T1/E1/J1 Interface Board

• PCI version 2.2 and 2.3 compatible
• Two T1/E1/J1 interfaces field expandable up to 62 Low-Speed Links at 48, 56, or 64 Kb/s or two High-Speed Links (HSLs) based on Q.703 Annex A or ATM
• Preventative Cyclic Retransmission (PCR) for satellite networks
• 5V and 3.3V signaling levels, full bus master/slave, and DMA capability with buffer chaining
• Auto-configure to 33Mhz/32-bit or 66Mhz/64-bit

For more information, please contact sales@ulticom.com.